Precast MES and CAD Software That Runs Any Machinery

Your Progress Group, Elematic, or Schnell equipment does not need its maker's software. CastLogic replaces the software layer and integrates the hardware into one platform, from design to the line to the books.

The Machinery Is Hardware. The Software Layer Is Your Choice.

Precast machinery makers sell a software stack with the equipment: a manufacturing execution system (MES) to run the line, an ERP to run the business, and a CAD link to feed both. Plants often assume the stack comes with the machine and cannot be changed.

It can. CastLogic by IntraSync Industrial replaces the software layer on Progress Group, Elematic, and Schnell machinery. The hardware integrates into the CastLogic platform, which handles design data, production planning, line execution, quality control, yard, dispatch, and accounting in one system with unlimited seats.

Prefer to keep the MES you have? CastLogic integrates with any MES and any machinery, so you can connect it now and replace it when you are ready.

What CastLogic Replaces, Vendor by Vendor

Each machinery maker names its software differently. The jobs are the same, and CastLogic covers them in one platform.

Machinery maker Their software layer In CastLogic
Progress Group ebos (MES), erpbos (ERP), stabos (machine and production data), Ahead APS (planning) Flow and Schedule for execution and planning, Production and Accounting for the business, Insights for machine data
Elematic Plant Control (FloorMES, WallMES), ELiPLAN (resource planning and scheduling) Schedule and Flow for planning and execution, Verify for QC, Stock and Dispatch for yard and delivery
Schnell Graphico Pro (rebar production lists), Optimo (order optimization), Grafo Boss (shop supervision) Engage and Designer for reinforcement data, Schedule for sequencing, Flow for shop tracking

Progress Group machinery without Progress software

Progress Group builds pallet circulation plants, reinforcement lines, and concrete distribution, and sells its own software with them: ebos (MES), erpbos (ERP), stabos (machine and production data), and Ahead APS (planning).

  • ✓Production execution: CastLogic plans the work, releases it to the line, and records what was cast, in place of a separate MES.
  • ✓Business system: estimating, scheduling, yard, dispatch, and accounting live in the same platform, in place of a separate ERP.
  • ✓Machine data: line status, cycle times, and downtime report into CastLogic Insights.

The machinery stays. The software around it becomes one platform.

Elematic lines without Plant Control or ELiPLAN

Elematic builds hollow-core, wall, and floor production lines, and sells Plant Control (including FloorMES and WallMES) and ELiPLAN for resource planning and scheduling.

  • ✓Production planning: bed and line planning run in CastLogic Schedule, by hand or with ISA proposing the plan.
  • ✓Line execution: work goes to the equipment from CastLogic and production comes back against the same job.
  • ✓Every product family: hollow-core, walls, structural, architectural, utility, and pipe in one system, on any mix of machinery.

Running Elematic equipment does not commit the plant to Elematic software.

Schnell reinforcement machinery without Schnell software

Schnell Group builds rebar and mesh processing machinery, and Schnell Software sells Graphico Pro (rebar production lists), Optimo (production order optimization), and Grafo Boss (shop supervision).

  • ✓Reinforcement from the element record: the same design that drives the quote and the pour drives the steel.
  • ✓One schedule: cage and mesh production is sequenced with the casting schedule, so steel is ready when the form is.
  • ✓Tracked to the piece: reinforcement status, inventory, and cost land on the job without re-keying.

The reinforcement shop stops being its own island.

Vendor product names and descriptions are taken from each company's published materials as of November 2026. All product names are trademarks of their respective owners. IntraSync Industrial is not affiliated with or endorsed by Progress Group, Elematic, or Schnell Group.

CAD That Feeds the Line Directly

In a vendor stack, the model is exported from CAD, translated for the MES, and re-entered in the ERP. In CastLogic the design record is the production record.

Design in CastLogic

CastLogic Designer designs underground and utility structures and generates the drawings, with no separate CAD seat or export step.

Or bring your model

Tekla Structures, Revit, ALLPLAN, AutoCAD, and other design tools integrate today. Element data arrives ready for quoting, scheduling, and the line.

See it on site

Site visualization for structural and architectural work shows the pieces where they will stand, tied to the same production and delivery status.

How the Hardware Integrates Into CastLogic

1

Connect the machines

Equipment connects over OPC UA, Modbus, REST APIs, MQTT, and other industrial protocols, whatever the maker.

2

Feed it design data

Elements come from Designer or from your CAD and BIM tools, once, with no re-keying between systems.

3

Plan and release

Schedule the line by hand or let ISA propose the plan around your plant's limits, then release work to the equipment.

4

Close the loop

Production, QC results, and machine status come back against the job, and flow on to yard, dispatch, and job cost.

See the full equipment list on Robotics & Vision, or how CastLogic stacks up against other precast systems on Compare.

Further reading: What Is a Precast MES? And Do You Need the One That Came With Your Machinery?, Running Progress Group Machinery Without ebos: Your Software Options, An Alternative to Elematic Plant Control and ELiPLAN for Precast Producers, Schnell Machinery Without Schnell Software: Connecting the Rebar Shop to the Rest of the Precast Plant.

Precast MES and Machinery Software FAQ

What is a precast MES?

A precast manufacturing execution system (MES) is the software layer between the office and the production line. It takes element data from design, plans what gets cast where and when, sends work to the machines, and records what was actually produced. Machinery makers often sell their own MES with the equipment. CastLogic does that job inside the same platform that runs estimating, design, scheduling, quality control, yard, dispatch, and accounting.

Do I need Progress Group software such as ebos or erpbos to run Progress Group machinery?

No. CastLogic can replace the software layer on Progress Group machinery. The equipment integrates into the CastLogic platform, which plans the work, releases it to the line, and records production, so the plant runs on one system instead of a separate MES and ERP.

Is there an alternative to Elematic Plant Control and ELiPLAN?

Yes. CastLogic can replace the software layer on Elematic machinery, covering the production planning, machine-side execution, and resource planning roles in one platform. Elematic hardware integrates into CastLogic alongside any other equipment in the plant.

Can CastLogic replace Schnell software on reinforcement machinery?

Yes. CastLogic can replace the software layer on Schnell reinforcement processing machinery. Reinforcement requirements come from the same element record that drives the quote and the pour schedule, and production status flows back into scheduling, inventory, and job cost.

Can I keep my current MES and still use CastLogic?

Yes. CastLogic integrates with any MES and any machinery. A plant can replace the vendor software layer outright, or keep the existing MES running and connect it to CastLogic so the office, the yard, and the books work from the same production data.

Does CastLogic include CAD for precast?

CastLogic Designer designs underground and utility structures and generates drawings inside the platform, and CastLogic provides site visualization for structural and architectural work. CastLogic also integrates with Tekla Structures, Revit, ALLPLAN, AutoCAD, and other design tools, so plants that model elsewhere bring that data straight into production.

What if my plant runs machines from several manufacturers?

CastLogic is hardware-agnostic. It supports OPC UA, Modbus, REST APIs, MQTT, and other industrial protocols, so Progress Group, Elematic, Schnell, and other equipment all report into one platform instead of one software stack per machine vendor.

Does CastLogic charge per user?

No. CastLogic is licensed with unlimited seats, so line operators, supervisors, QC, yard crews, and the office can all work in the system.

Running Progress Group, Elematic, or Schnell Equipment?

Tell us what is on your floor and what software runs it today. We will show you what CastLogic replaces and how your machines connect.

Schedule a Conversation